Just wanted to see how it was made after I ruined the packs falling. 
1 Like
Ah the old sk3 wobbly can. Tip. Never run those things without first re doing all the loctite. Especially the front plate 3 philips heads.
Edit; the newer ones do indeed run allen bolts now. My early ones have philips.
3 Likes
You’ve just successfully guaranteed I will never try the sk3 motors. 
2 Likes
Once you put thready on them they last forever.
2 Likes
I didn’t know it was a known issue.
Any reason rethreading won’t work?
1 Like
I run those almost exclusively and never had an issue. I got into a habit of checking all bolts on anything manufactured in china though because QA…or lack thereof.
Its just those front 3 plate bolts that usually come loose so once thats sorted they are tanks. No reason why you can’t rethread though if being loose has done some damage.
2 Likes
Never had an issue… except wobbly can?
LoL.z this is too confusing 
1 Like
Once due to loctite or lack of it which I explained quite eloquently I thought.
Put your glasses on Brian.
For perspective I don’t consider checking and re doing thread lock on a motor an issue. Magnets falling off and bearings imploding yes.
I rarely wear my glasses. Only to drive an automobile or play cards.
1 Like
What happened to my motor?
1 Like
You probably fucked it due to incompetence. Joke.
What did happen to yours?
1 Like
not sure cant open it up
1 Like
Lets take this conundrum to a pm.
1 Like
Aw, bummer, hope you’re all right. What’s ruined about them?
I may be wrong but it looks like your switch is not protected there. Aren’t you afraid it would hit something?
Edit. Damn forgot the link.
1 Like
Yeah I thought about it and its definitely not protected will make a cover at some stage but should be iright for where I ride… (face plants)
1 Like
bro NOOOOO I’m sorry man
1 Like
This is 210% the dopest shit I’ve ever seen in my entire life. Vaginas are up there too. This wins.
so whats the scoop?
Is that a battery failure Or just housing breaking apart? It looks kind of lumpy 