Damn!!
Howās the torque? Top speed? Whatās the range your gettin?
@Robin, please please make a build thread and do a little bit of write up. Also make sure to put pics in order. Very inerested in how you created the mould for the enclosure and fitted it perfectly to the deck. I bet it will be a popular thread.
2 Likes
Havenāt maxed the board out yet, only took it for a short ride today. This battery is from my previous build but I was getting at least 20 miles in SF hills riding hard (I never actually tested the max range because I get range anxiety and end up charging on group rides). I could probably get 25-30 miles on flats.
Iām hoping to hit 40+ mph. These motors took me to 37 on 15/38 12s on a previous build (or was it 15/36, not sure), so I should be able to hit 40. That being said, torque is slightly lower, but still pretty good since I only weigh 150 lbs itās still plenty of torque for my needs.
4 Likes
thatās a siiick build. that enclosure thoughā¦
1 Like
Are you changing electronics to a vesc?
2 Likes
@rich
How did that happen
š¼ Pictures and nothing else!
ā¦and where is your trampinator title by the way @BillGordon @mmaner
2 Likes
Andy asks and it is done.
3 Likes
Well done 
3 Likes
Well, secured the motor on the motor mount like usual for easy removal of the bell. Then I pulled the bell but there was no resistance from the magnets, just from the wires 
Meanwhile I could separate the parts and gonna try to glue the stator back to the motor plate. These are cheap ass (before tax and fees) motors from china. There is even just 1 flat spot for 2 bolts holding the shaft, thatās why it moves sideways. And the windings are also outside of the motor, no silicone or plastic wires. In the pictures it looks like 12AWG but they are heat shrinked windings 
.
I kill every motor within a few days/weeks/months this is so frustrating. Thatās why I tried cheap motors (battle hardened) but then you fight with more problems as you can see.
Any recommandations for a reliable sensored motor?
6355 or 6364 150kv with 10mm shaft and for my MTB motors with 8mm shaft, 190-220kv and longer (or equal) than 6374 (no SK8 or closed Maytech)
Haha thanks for the title 
6 Likes
I think my favorite is that yoda one or the hand 
. Is it the shine on the epoxy that give it that wavey trippy look? And you got some stickers
4 Likes
It is the gloss finish of the epoxy and the weird light in my Loft casting reflections all over the place.
The Yoda is clearly for @deckoz to update Master Evo. He did the art.
The hand is really freaking cool. It is my favorite from this batch.
It is a painting by @Deodand that got high res scanned (or photographed, I forget), and we got it printed. So it is his original painted artwork now captured on his ride!
Still loads of work to do on these. Sanding, staining, grit, blah blah blah.
7 Likes
The hand reminds me of the Gonzo Hunter S Thompson symbol.
3 Likes
this is so next-level, I just canāt lol
I seriously want them all. Thatās messed up.
4 Likes
Iāve got some fun plans for the trippy stick. Changing by the minute in my head 
1 Like
Your boards look absolutely incredible. The colors and sharpness is impressive considering it is fabric! Good job!
4 Likes
where did ya get those nifty carbon motor covers?
If i got the time for it, i do
I would say the colors are so wonderful BECAUSE itās cloth. The material Itās printed on really makes these designs pop. I mean Tim did such an amazing job on my board, as he does every board, that it looks exactly how I rendered it in illustrator. I know I say this a lot but @Sender youāre a damn legend.
5 Likes