Having all that weight at the ends of the board does not seem like a very good idea to me.
This increases the rotational inertia, making an already heavy and difficult to turn board of this type, even more difficult.
2 Likes
That is a pretty sweet trail. Yous is lucky.
Where is it?
1 Like
Beautiful! What camera are you using btw? Footage looks really sharp, and the invisible selfie stick stitching is flawless!
1 Like
I’ve been to the shasta dam. My grandparents live in redding and my mom is from McCloud.
Always a shit ton of driftwood being pulled out of shasta lake.
@rusins thank you… I hope you’ll understand that as owner of a photography company, the answer to your question is considered proprietary information.
2 Likes
i’ll bet it has a lens in it. You’re using one of those fancy cameras with a lens in it aren’t you… sorry i ruined it for you.
5 Likes
good for aerial…
3 Likes
Yeah, I know that camera does it, but the videos I’ve seen filmed on it don’t look nearly as good as that of @professor_shartsis. Will postpone buying one until whatever he’s using comes out 
(In before I get called an idiot when it turns out that was what he was using lol)
That doesn’t look water-sealed to me 
Sexy build! Only thing I don’t like about it is the green edge when looking from the top 
1 Like
It’s very lightly water-resistant and very, very heavily waterproofed. It’s designed so water can get inside the enclosure and, in theory, it’s fine. Of course, there’s this.
The last board I made I only had one water repair so far. I’m still trying to get down to the magic number of zero repairs – it just works.
1 Like
Also, there is foam window seal under the enclosure lip around the wires. You can see it on the front where it’s sticking out. It was too difficult to get it together the first time to go back and do it again without that sticking out.
1 Like
The 3d printed bindings from @danile at the other forum.
2 Likes
@Venom121212 How do you like those F1 bindings? they don’t have any adjustability do they? Too easy to slip out of?
They’re honestly not bad for a first setup of bindings. I like being able to hop out of them easily at stops. They are double velcro layered adjustable. I’ve had my eye on the F5 bindings for a while now. It just hurts me that the heel straps are another purchase and not already part of the binding cost. I hear nothing but good reviews about them though.
I think if I had heel straps I would do better at that jump park specifically. Idk if I’d want heel straps on a board I cruise around the street though. I’m thinking of putting the better than freebord bindings on my hummie build but I need to try the concave of it first to see if necessary.
Just waiting on Unity shipped email now. Please?
1 Like
@SeanHacker, wanna talk about this? Did you FINALLY have ONE bad experience with Enertion? 
I mean one too many? WTF happened?
7 Likes