Going to be used on the Killshot deck coming up with these.
13 Likes
Very cool. Width?
1 Like
220mm
5 Likes
Very cool man. Those are very pretty. I love shiny things. I just can’t help it.
6 Likes
Thank’s man! It is pretty.
4 Likes
haaaaaa, finaly someone did it !! what is the diameter ??
which AL ?
I wasnt expected it come so fast ! 
1 Like
A bit more inspiration for us
top = Kahua hanger profil
next = mistake … but 220mm too (I didn’t have any in hand and make an octo style and not hex … it was before the second Mad hub GB)
next = Caliber style ends
below = for Mad Hub to go/work with the 220mm one, with integrated heatsink ! (like the last pic)
5 Likes
Ouch… How did that happen? This is dangerously low… did this happen from one day to another or didn’t you check for a long time?
1 Like
What is that? Looks like something that can be moved both left and right, but also spin… 
1 Like
isn’t that to wals thread?
@yelnats8j: Have you connected the B-? I got similar readings when I only connected the balance leads.
1 Like
It’s an involute gear cutter 
7 Likes
@3DServisas just out of curiosity what material it is? It’s like HSS coated with something? Gear manufacturing is a fascinating world itself
1 Like
HSS titanium coating gear cutting tools
3 Likes
Thanks Yeh tought so. Looks like an helical cutter? Or it’s for spur gear? Did you machine it yourself?
1 Like
hahahah
never say never !!..
2 Likes
When I messured it it is fine.
Was some stupid thing with the smart bms.
1 Like
Nope, cause it fixed it self when I unpluged and pluged back in the balance leads.
Never had any issues with my smart BMS. I use the same software
Wow… what do you do with the leftover hangers?
1 Like