Only really come in AT sizes
3 Likes
I didn’t like the seam being centered and stuck out like that. Good to know, thanks. I’ll just grab the damn clevers.
1 Like
Or message Timo and ask for his updated ones, that would be the best solution imo.
I tried that but will happily try again. I feel like I’d like the rounded tire profile more than the square.
After getting the flat that caused me to fuck myself up. I went and bought slime and Mr tuffy tire liners. I’d like to think this will help but we’ll see.
3 Likes
So uhh…this doesn’t work. The front angle is now less than 35 degrees with the 5 kingpins so it turns LESS than the back 🤦
This is so disappointing…
14 Likes
What exactly is going on here…
3 Likes
World’s first quinta-king pin 
It’s a Gullwing sidewinder with 4 middle stages
6 Likes
5 Likes
I got speed wobbles at 12 MPH 
Literally unrideable
13 Likes
In this case, I think you need a mtb like tipped deck ridden upside down. Or - 30° risers.
1 Like
I mean the pivot cup doesn’t fit right anyways, the middle stages don’t really turn because they are wedges into the next stage. Maybe with Evolve trucks it would work better since they work as TKP (Sidewinders can’t be TKP)
2 Likes
lol, I might have the required parts to make this happen… board is going to be 3ft off the ground.
3 Likes
That was not a serious suggestion by any means lol
1 Like
Do it. I beg you.
1 Like
Should we call it slow wobble?
5 Likes
Something like that
2 Likes
A slobble…
5 Likes
Wow ! too bad we are not neighbors! At least from countries ^^ …
And you don’t want to re-use it ?? !
2 Likes
custom graphisme or you buy it like that ?
Im looking for a smthg like this since so long !!
2 Likes