Oh, I see it now! 
1 Like
Has it really been 4 years here?
2 Likes
i wouldnt know a good spot welder from a shite one. No judgement from the special needs corner
Those cable combs look slick af, i am going to steal this idea!
3 Likes
Thanks 
2 Likes
@Skyart Is that a qs10? I have one and itās so damn big. What are the 4 small pins used for on it?
I see your qs10 and raise you a qs12, sir.
3 Likes
No clue what the pins are for lol, i guess anyrhing you can dream up
3 Likes
Dat wheelbase tho xD
I would flip the baseplates on that setup
1 Like
That would probably give me some much needed clearance too lmao.
1 Like
Are you using the inner deck holes or the outer holes? I swapped to the inner ones to squeeze a bit more clearanceā¦
2 Likes
Ah the flux deck only comes with one set of holes. I could probably drill out a second set but I would also run into problems with my davega and antisink plate not sitting flat because of the curve to the standing area of the deck.
2 Likes
Ah yeah, duh. That wheelbase is crazy wide!
2 Likes
Unrelated but these are hella bright, definitely going with them when the adaptors get finished up.
1 Like
Yeah dude, itās crazy, I love them. I donāt even really need to bring a flashlight on my rides anymore.
Also got the brake lights setup the other day, so cool. Love the mounts being integrated into the BN drives.
Highly recommend!
3 Likes
I have boardnamics drives as well, may need to pick up a set. Do those also hook up internally or do they have dedicated batteries inside the lights?
1 Like
My wallet cries more and more every day 
1 Like
These are battery powered. Better that way for brakes imo. I think his stock for them is like a month out though unfortunately.
1 Like
What are they exactly?
Yep - slow boat shipment lol itās gonna be a bit.
Your setup is looking real good tho, I havenāt had the tail lights on my board since I switched to newbee drives (mounting them to those is another task on the long list)
Iām calling them āC8 Tail Lightsā they will be available when the shipment comes. Not sharing my website around yet as Iām still finalizing some things but weāre getting close. Iāll be making an official Vendor Corner post when Iām ready.
While Iām still working on ways to mount to Jump Drives, the Newbee 4gs, etc, they do come with an elastic strap that can be used on certain setups. Iām also thinking about options for mounting to my esc enclosure, or on top of a rear truck baseplate
3 Likes
Considering using protected cells in a board?