You got enough cells in there bud?
18s7p?
You got enough cells in there bud?
18s7p?
Never enough cells. Haha
Yeah 18s7p
What enclosure is that?
Flux AT2?
Yep its a Flux AT2. You do have to shave off these additional plastic mounts for the stock battery to fit a 18s7p.
Ride vids?
Where is the rest of your gear!
Obviously it is not finished but the Stooge wheels the back with the 97mm abec at the front makes it look like a mini dragster. Sure Iāll take some vids once completed
Oh, nice, always dreamed of getting one of those, never seen a resin printer in persone, Iāve heard the smell and fumes are much worst than those a any fdm printer which makes it impossible to use at home if you donāt have a real workshop
I have a ventilated area for printing fortunately.
Yeah itās kinda nasty, but the parts come out so clean itās mind-blowing
Someday Iāll have a descent workshop and Iāll get one
its not that bad. I have the tiny photon. Has an active filter on the outlet, sure if you sit right next to it its not ideal. But otherwise its kinda meh
Mini photon is pretty great when it works. I made a Z axis upgrade on mine and the prints are superb.
Takes some patience though, since you donāt know if the print is succeeding until mid way through and delamination is a constant battle.
I can only imagine the frustration with these larger resin printers
Saw theres ABS based resin nowdays thats sāposed to be durable. I havnāt pulled the trigger on it yet tho
Iāve had shards of glass pierce through 5 mm of very hard urethane so I wouldnāt say it is impossible. I think the depth of my urethane sleeves isnāt much deeper than that but I donāt know the exact thickness for them for a better comparison. Also Iāve removed much larger shards of glass before but just didnātā think to measure the piece of glass after removing it
I have my workshop/office/study in a sectioned off area of the living room, next to the kitchen. The fumes arenāt the nicest but they dissipate quickly and arenāt any worse from my experience than using isopropyl alcohol.
Oh hell yeah. I see some BN270ās in my future. Iām on 220ās now and I donāt think that will play well with pneumatics.
Once I went with trucks wider than my deck wheelbite stopped being an issue altogether.
ā¦Though now because of overzealous motor placement I get motor bite and my big feet still hit larger wheels if Iām not careful about foot placement.
270ās are a must but youāll be happy you got them! This board is a lot of fun to ride!
Iāve never once had these issues lol