Dang thatās a cool bat/dog you got there. 
Gremlin ears are the result of mixing a breed with large floppy ears (Dachshund) and then a breed with upright ears (Jack Russel Terrier) and then not taping them down or up when theyāre young. I didnāt know taping them down was even a thing but also she found me at around 9 months old and it might have been too late even if I knew about it.
Yes, she found me via showing up outside the house 
she was abandoned by parents who expected a 5 yo to fully take care of a dog
Taping down looks like this:
Or can be done with heavier amounts of tape to really weigh them down
Doesnāt hurt the dog although some dogs may try and remove the tape hence the cone in the second picture
1 Like
Gremlin ears make character, no tape needed.
3 Likes
Iām not exactly sureā¦ i donāt even remember riding home 
but iām gonna go with a combination of beer and pitch black darkness
2 Likes
Yup
3 Likes
This is beautiful! The whole setup comes together so perfectlyš. Will the board with this specific setup as shown be a ever be production model?
1 Like
Not entirely sure to be honest.
Testing and demand will likely be the judges of that.
1 Like
Misalignment?
1 Like
The bolts not fitting the case was the motor mount being 180degrees the wrong way round.
The axles being too short are just compatibility issues using stuff from multiple places. I think itās all on as itās supposed to be just a little wider than the axles are designed for.
I could help you out with that one.
I have some etoxx axle extension. If you are interested, send me a pm. Iāll get some pictures for ya.
Edit: ah shii I just read in the other chat you got the savage trucks. Than itās not gonna work. Needs 12mm axles 
1 Like
doh! ah man I didnāt even know that existed so thanks for giving me another avenue to consider
On 23rd August I was told 1000 TI chips I can order and they are in stock for normal price.
IĀ“m not doing the electronic parts ordering and manufacturing, so have to ask if these are already ordered for the production.
3 Likes
I have always used a Dremel and it was relatively straight forward
1 Like
What the battery capacity?
1 Like
Can fit 80x 21700 no dramas. You could probably fit at least 16 more if you staggered on the very sides and used a small gasket
3 Likes
Technically speaking, your butyl is a gasketā¦
3 Likes
Of course. Iām really talking about spacers though
I have been pondering for a very long time about making an enclosure that is just a gasket. With a lid.
It will happen. Iām just biding my time.
2 Likes
Lids are the best. Iāve used 1mm rubber sheet to great effect, stuck on with, of course, butyl tape
Then the mount to the deck doesnāt even matter in terms of ingress prevention.