@Venom121212 are those old Sunmates going to fit on the boys go cart ?
2 Likes
Haha Believe me theyāll get them back when Iām done 
3 Likes
I measured the bearing to bearing and they should be perfect.
Unfortunately I havenāt been able to install them. Got our biggest craft show of the year coming up and Iāve been working non stop on shirts and 3d prints.
10 Likes
Nice 
looking good
3 Likes
Yup, I do know of these. I actually told a friend back in September to order a pair for me when he places his order at MBS. Well he only ordered yesterday, after I sent him this picture 
I hope it will arrive soon, seems like much of the stuff is still on backorder on the MBS europe site.
I actually wanted to get Metal Matrix IIs to start with, but the same guy who is ordering this for me broke his Comp 95 deck in early September and sold off his remaining working parts (F5 bindings, rockstar II hubs with MBS T1 tires, Matrix II trucks with plastic baseplates) for an unbeatable price, about 220ā¬ or so for everything.
2 Likes
You found it!
Just make sure I get my cut.
1 Like
Good catch! Ill definitely flip them
4 Likes
Always Daddy
3 Likes
Curious to know what you think of the inverted S2s. I tried it once and it really didnāt work for me.
3 Likes
I donāt really see the point in them, but this is my brother in lawās board and he swears by themā¦
Iāll say that I have never really adjusted them for my feet/shoes, but even that is a nuisance with that style of binding, so yeah, not for me.
2 Likes
When setup correctly they are really quite good. They give you a huge amount of extra leverage over the board and make it a lot easier to navigate hard turning. I have big love for the S2 bindings.
2 Likes
This jig was made right after a wire slipped while soldering, shorted, and almost vaporized your nail?
3 Likes
Hahaha i avoid soldering live wires wherever possible.
The ājigā is the parallel adapter that i used when I ran the dual lipos on the kweld, it acts as an excellent heatsink for soldering loopkeys 
The thumbnail is the result of an unfortunate incident with a hammer. Iām stuck with it til it grows out 
6 Likes
That looks SUPER weird. 
1 Like
I dont know/donāt remember what you are referring to 
I didnāt find the board, I had the idea and planned the set up then out sourced anything that requires actual skill to @Skyart
from there I just post it on the interwebs in hopes all you cool mfs smash that like button and my karma on Reddit increases.
If you mean hangers/axels, no and it may be just a bit sketchy of a work Around until my BN270ās arrive.
1 Like
These look so good! What material are you printing with ?
5 Likes
PETG (as shown on the printer display 
)
It takes forever to print though. I had a batch of 14 pcs printed over the weekend (for 7 P-groups) and it took more than 48 hours.
4 Likes
The devil is in the details
Thatās a long print!
2 Likes