🖼 Reply to “Pictures and nothing else” thread_2020_summer

Kai · October 28, 2021, 8:47pm

absolutely. XD

ShutterShock · October 28, 2021, 9:11pm

I know, I’m disappointed too

monsterbuilder · October 28, 2021, 9:19pm

Mixed reviews on the folding props. They are balanced really well and less prone to prop wash. They also don’t break as easily in a crash or when using turtlemode. And of course they have a significantly smaller footprint when you need to store the quad.

The things I don’t like about them is that they are slightly heavier and the hubs can rupture midflight without any notice. It’s unnecessary complexity for me, since I mostly fly long range. The other thing I don’t like is having to assemble them. They may be worth trying again in a few years if there continues to be product development.

glyphiks · October 29, 2021, 1:49am

Its a poastmote. Definitely my favorite puck shell.

Buttons printed in clear and black to eliminate the need for all the holes in the case

Skatardude10 · October 29, 2021, 1:51am

Yeehaw!

Flasher · October 29, 2021, 3:02am

thats the part i wanted to know. settings, material and complications?

DerelictRobot · October 29, 2021, 3:07am

glyphiks · October 29, 2021, 3:13am

Petg, prusaslicer has a neat option to stop the print at whatever layer you want to change the filament so i just used that.

The black doesn’t seem to flow as well as the clear, so i had to bump up the flow by 10% at the change, but not a big deal

glyphiks · October 29, 2021, 3:15am

I still got love for the PPB. Don’t fret now

ShutterShock · October 29, 2021, 5:38am

What width are those hangers? Looks very very similar to the build I’m going to do lol

Dizzie · October 29, 2021, 5:49am

Probably 184s since he got dual 6354s on there

ShutterShock · October 29, 2021, 5:50am

That’s what I was thinking

b264 · October 29, 2021, 7:07am

The most expensive drive ever taken

b264 · October 29, 2021, 7:09am

I think those are the 170mm hangers

rafaelinmissouri · October 29, 2021, 12:58pm

correct.

they are 170s.

I asked Kevin a while back to make them special.

using the boardnamics pulleys with the 184s left some space in between the motors and kind of drove me crazy…

so Kevin made me these 170s that are a perfect fit for 6354 motors.

there are a few pictures here that show the minor difference…

but I really think 170 should be the standard… @Boardnamics

Plurf · October 29, 2021, 1:19pm

Can you freestyle them or would they fold during flight ?

monsterbuilder · October 29, 2021, 2:33pm

You can definitely freestyle them. No issues with air mode or being inverted. Can’t even tell a difference to be honest.

DEEIF · October 30, 2021, 1:28am

I’ll take em

Tampaesk8er · October 30, 2021, 4:16pm

Best tools i ever had for Esk8.

janpom · October 30, 2021, 5:52pm

Now you can finally build an electric skateboard for your hamster!