Yes it is, thanks for poiting it out! Photos were taken in a rush, next time ill double check them. It should be like the normal panel mount. 
Will arrange a new image.
2 Likes
@Andy87
I am not 100% sureā¦
I did not back track on the trail to go find itā¦
I think I may have moved 20 or 50 meters before realizing it was goneā¦
This is my quess.
The wheels sprocket hit a rock just right breaking the chainā¦
Lots of rocks like that on that little trailā¦
Or maybe that is the exciting story and all that that happened was my master link came looseā¦ No half links on this time.
3 Likes
Thatās a good information to know and good the chain just dropped when broke.
3 Likes
I have always said, it is better to be lucky than it is to be goodā¦
2 Likes
So @Andy87
Earlier in the day yesterday I did something differentā¦
I put the board in my car and drive to a park to ride a mountain bike specific trail.
It was crazy hardā¦
Narrowā¦ Twisty and rocky as hellā¦
Pictures donāt do it justice.
I had to walk next to my board and pick it up a bunch of timesā¦
And in no time I was drenched in sweat.
But it was kind of fun and definitely a challenge I want to explore moreā¦
The chain broke in the familiar trailer near my houseā¦
And I was able to ride back with just one chain no problemsā¦
3 Likes
Butā¦ You said i was your bigger fanā¦
2 Likes
You are my onlyfan 
2 Likes
That sounds like a great mtb session 
2 Likes
3d printed?
1 Like
Yessir.
2 Likes
It looks super clean! What material and 3df?
2 Likes
I might consider printing in ABS and vapor sealing them to increase strength, especially with that layer orientation
2 Likes
This is ABS. Iām actually really surprised by how sturdy it feels. This one is a prototype that I printed to check the fit. I just finished designing it.
5 Likes
Itās cool bro, yeah it probably feels strong but those are some high stress areas lol
Lmao I was thinking about designing something like this for my street board to help me turn tighterā¦ Have you tried it yet? How strong is it??
1 Like
You should give a look at the Yobis thread
2 Likes
I have some free-bord binding that I picked up years ago. People always ask me about them and I donāt think you can currently buy them, so I figured Iād try to design some that could be 3D printed.
This design is fresh off the printer. I havenāt tried them out yet and the weather is shit today. Hopefully, sometime this week. They do feel super strong.
4 Likes
I can vouch for this, I witnessed it in action myself. Instant bond so make sure you have whatever youāre bonding where you want it before you press it together.
3 Likes
you can buy them, but they arenāt selling the hardware to affix it to the board. which is the plate and some other things.
1 Like
why did I even bother building my own metal deck. I want one now
7 Likes