Idk. I rode it home slow one night, looked at it in the morning and saw how loose it was and found that.
Broke the master clip with the two prongs. I had a spare.
1 Like
Give that sad chain a big of lube when you on it.
Hard working chain looks a bit dry 
1 Like
Yah I’m bad about regularly lubing it. Probably part of the problem!
1 Like
Congrats on being a real sk8 bro.
1 Like
The real deal
1 Like
That one on the right though 
straight dope
2 Likes
i know, its almost like i have spent a long time evaluating every possible option for how to source enclosures.
5 Likes
I recommend fiberglass over that, but to each their own. Kydex is much better than ABS, but it has toxic fumes and it’s a severe pain to work with. Carbon fiber has radio issues. Fiberglass is just right.
Is that a 3d print? mind sharing the STL?
1 Like
Here ya go! There is a port for an external metr antenna on the side too. The heatsink is just a .5mm stainless steel plate.
VESC-1.stl (545.6 KB) VESC-2.stl (211.0 KB)
Lid bolts are M5 and go right into the plastic.
4 Likes
Literally “kick to start”
1 Like
Sweet! Thank you!
1 Like
At first I thought that was 56.0V and then after I realized it was 5.60V 
I’m sorry for your loss man
6 Likes
Thanks, to be honest I’m impressed with myself that it take this long to forget the loopkey plugged in
4 Likes
I never forget to turn my ESC off after I wired a motorcycle tail light into the battery indicator port
Whenever the ESC is on, the tail light has to be on. I learned my lesson after draining my first pack to 2V…
12 Likes
Will follow your lead somehow, or get something that beeps after a while on
1 Like
Do you have a link for the tail light? And/or an equivalent for front white lights?
1 Like
This is one reason it is scary to make a giant battery and then run it without a BMS
So easy to ruin it.
This idea I like a lot
Just a voltage alarm built into the pack too seems like a good idea.
3 Likes
I used this tail light with the brake light wired to be always on for extra brightness.
https://www.amazon.com/gp/product/B07QNN17J5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
and this buck converter for stepping down the 12s to 12v
https://www.amazon.com/gp/product/B0836QF3XT/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
combined cost is $14! Totally worth it.
Edit: Unfortunately no white verison but I just used a 7" LED bar and a custom 3D printed and Aluminum mount for the front