🖼 Reply to “Pictures and nothing else” thread_2020_summer

Waaait how did you get those pics!!! They are from my buddy lee in the dutch riders app!!! Are you in there!?, Naaah he must have sent them to you :rofl:

Who are you talking to?

3 Likes

Oh my bad @IDEA

4 Likes

Yes that’s the very same deck :+1:

It’s a little on the short side for me now I’m used to a 44" RedEmber but the drop and concave on this is lovely.

Also, I weigh 95kg and it feels stiff enough for me :man_shrugging::grimacing::joy:

2 Likes

You can get RGBW and pixel tape in neon flex as well if you want the best of both worlds but it costs more

1 Like


Did you use a drill to make those perfect holes in the enclosure? @glyphiks

2 Likes

The chargers I am using are both 12S ones but different amperages. I’m using a Torqueboards 4.4A and a 2A. They work fine, I dont know about having them both trying to balance at the same time, but using them as a top off/turbo charge works just fine. I assume the BMS handles all of that regardless.

I actually found out about dual port charging from those uni mother fuckers in NYC. I had to ask about it which led me and @bwahl602 to use this method instead of one husky ass charger.

I used a spade bit for the circular holes and drilled three small holes and then used a flute bit on the dremel for the triangular holes :+1:

2 Likes

can you link me to that buck?

20200621_122616_1

I’ve got an enclosure project on the go that uses a flexible optic strip, lit by 2x leds at each end. It looks pretty good on the bench but I’ve not fitted it properly yet. Lights and colours controllable via an app on phone.

I tried an EL light strip which is looks good too, but doesn’t feel very durable.

9 Likes

Link?

2 Likes


Do the gear drives too :star_struck:
If possible :call_me_hand:

1 Like

8-60v to 3-32v 7A

https://www.amazon.ca/dp/B076MTWCYS/ref=cm_sw_r_cp_apa_i_KPkHFb5HNK7PX

5 Likes

Thank you!

3 Likes

This is just sad

6 Likes

I did some EL wire work back in the day. I can verify that its not terribly bright, but is a great night effect.

The thing i didn’t like was the fragility of the inverters. Seemed like the kept blowing all the time.

8 Likes

is this on the raptor shop?
nevermind its on massivedickhole.com

ITs even the same picture from flipsky website


5 Likes

Wow…nice!
LOL…I may end up with LED “running lights” and some cool EL accents. Hmm…could get pretty tacky pretty quickly though. Less can be more with this kind of thing.

2 Likes

Where did you obtain such a beautiful wheel

2 Likes