🖼 Reply to “Pictures and nothing else” thread_2020_summer

[Plurf]

Yep i can’t wait to ride it !
Got it shiped internationally by a ‘small’ shop in Fargo ND, at an amazing price

And just this morning i got a mail from landyachtz that they are making some right now (you can get them from the canadian shop) but i made a better deal anyway ^^

[MYKC]

@Plurf

Yep i can’t wait to ride it !

Push board or electric?

[Plurf]

i’m going to put it on ownboard hubs, with a super small battery over the baseplate

[RyEnd]

12S1P p42a in a fanny pack, yo.

What ESC are you plannin’? I think the go-foc dv4 is the smallest we have available until trampa releases their little guy.

Well, and those maytech singles.

[Plurf]

@RyEnd

12S1P p42a in a fanny pack, yo

Right now i’m going with a 6s2p hd2 so i got 20A per motor and a top speed of 26km/h which isn’t much but seems ok for comuting (i-ll change it afterzard if it gets boring)

@RyEnd

What ESC are you plannin’? I think the go-foc dv4 is the smallest we have available

Right now i use two standard 4.12 that i have but i thought about buying some makerx mini

This way i’ll get a less than 3cm high enclosure which would aproximately be the size of the tail

[Plurf]

@Flasher

Well done bro, i use one of those since a year and print almost only carbon fibre pla, and no sign of usure
One of the best investment i had for 3D printer update
(Even more than the auto Leveling)

[MYKC]

Where are you mounting your ESC?

I’m going to mount mine on top of rear base plate.

I’m going to mount my battery underneath deck, but concerned with clearance because of how low and flexible deck is. I prefer Lipos, but don’t think there is Lipo thin enough (might have to unfold some packs).

[Plurf]

@MYKC

I’m going to mount mine on top of rear base plate

This
And the battery in the same enclosure, I made a super small 18650 pack and the esc will sit on it in the same tiny enclosure,

@MYKC

might have to unfold some packs

This could be a great idea in rapport of heigth/capacity

[Plurf]

All together less than 4cm high, and not bigger than the tail,
Even less if i go with smaller escs and without the caps

[MYKC]

how much range are you shooting for with that small battery pack?

[Plurf]

I used it on a small peny board with a single 5055 270kv motor and 80 weel and was getting around 15km (but at higher speed)
I have no idea how it will behave with the two hubs, if i get 12-13km that will be enough to get me at work and the whole for around 4kg

I mean i’m getting more and more tired of carying my 25ish kg cruiser for not going faster than 25km/h on my daily ride

[Venom121212]

@flasher what are you printing that you need that for?

[Brently]

@Creavenger

@Creavenger Tell me what is the first thing you are going to make???!

[Scepterr]

this makes me feel so lazy having a 90% complete workbee collecting dust

[Creavenger]

The most exciting thing ever!

…probably a plate to cover the big ol square hole on the top of the column

[Brently]

hey its serving its purpose

[Flasher]

Nothing (for now). Read that it was the nozzle to end all nozzles.
I’m learning with pla. But I eventually wanna use carbon fiber nylon and phosphorescent filament. Found those are some of the hardest things to go though a nozzle

[Venom121212]

Yeah definitely anything abrasive it will be the right tool for the Bob.

[Arek]

That’s the machine:

I guessed close enough, it was £7000, don’t know the model number the bloody thing doesn’t seem to have any kind of label/plate and project manager that bought it couldn’t remember it of top of the head

[b264]

Pictures and Nothing Else!

[20201008_173553] [20201008_173438] [20201008_173553] [20201008_173438]

never forget to leave space for the fishpaper, wire, and insulation

(like Evolve did on the Carbon GT deck)