Just casually flexing with shiny bois. 
2 Likes
I think you might have not fixed the wheel to the adapter using the bolts at all. The bolts are 20mm long. If they were coming out one by one you wouldn’t have the mounting holes anymore. In this case you have perfect holes and smooth finish. I got to give it to you, it’s a first I see somebody who managed this.
3 Likes
beautiful.
1 Like
Sigh… guess I need to double check my wheel is attached properly from
Now on 
First time for everything 
3 Likes
Ty, I’ll get one of the original/old one
@ahrav probably the same geometry just different look
1 Like
Sweet build! But I gotta ask: don’t you think the Sportster deck is thin enough to mount the direct drives in drop-through? It’s gotta be close, right?
1 Like
i’ve seen people with drop through setup but they all had to route the deck a few mm to clear the cans.
I think if i keep the rear stiff enough i’d be fine.
1 Like
You take way better pictures than I do
1 Like
So dudes.
Are you able to switch between thumb wheel and trigger without killing yourself?
2 Likes
this
1 Like
Only after 20minutes of stress
No problem at all, more so if on thumb rolling forward is accelerate and rolling back is brake, while on trigger pulling back is accelerate and pushing forward is brake (so essentially the pot is rotating the same direction for the same result).
1 Like
If you switch from thumb to trigger (or trigger to thumb) control, and you get used to it over the course of a few minutes and are riding along and BAM
a car pulls out in front of you, don’t you accidentally hit the wrong control by instinct occasionally?
I know I do.
It’s why I stopped switching controls very much. When you’re using your brain, everything is fine, but when you have a sudden instantaneous instinctual response often it’s reversed, which exacerbates the problems happening at that moment. You see the car and brace for slow down right as you smash the brakes … but then the skate starts accelerating hard … and all in a fraction of a second.
2 Likes
You could technically invert the pot?
1 Like
Nope, maybe because on both thumb and trigger remotes I instinctively put force through both throttle fingers in said directions.
1 Like
Bruh, did the lanyard break? Are you ok?
1 Like
love this build
super stealthy…
3 Likes
Wow, that looks really nice
3 Likes