🖼 Reply to “Pictures and nothing else” thread_2020_summer

[Saturn_Corp]

Moon carbon mounts with those @akhlut axles. I should have ground them down near the screw holes before I rode them the first time. They are shredded but still strong.

Rkp 150mm

[whaddys]

do you have a build thread for this? I’m about done with mine that’s same settup as you but SR TKP. Would love to see how you’re making yours work =)

[Saturn_Corp]

Raspberries and Blueberries | Venom Mach 1 Magnum | Haya | Focbox 1.7 | Surf-Rodz RKP | 5065 | 12s4p 30q | Metr Pro | Anti SparK? | OSRR @DerelictRobot? |

Bit of backstory: I slightly cannibalized my dying direct drive board for it’s esc’s a while back for my mountainboard. Since then my speedy board has fallen to decay and have not went zoom zoom on urethane. I miss the whole getup, minus the vibrations but that’s not a deal breaker! And, Start! [IMG_20191228_104653] Small wide wheels were the first idea I had. (among other things) and that would be small wide wheels. I experimented with Caguamas and Abec11 97’s on my previous board but had …

[ZachTetra]

What hubs are these?

Pictures and Nothing Else!

[IMG_20200902_233617]

[NuRxG]

Muahahaha!

I’m glad you noticed

What hubs are they indeed

Looks like an MBS Fivestar… but black!

[Venom121212]

A man of fine taste

Pneumatic Wheel Compendium (Serious)

None at all. I have both sets and constantly wonder why people buy rockstar 2s over fivestars. I run my roadie tires at 55 psi with no issues. Fivestars ftw! Plus they take dye really well so you can customize colors. [20200612_191930] [20200612_205753] [20200612_201111] To be faiiiir, the rockstar 2s are nylon and would take dye the same

[Minimadness]

Whats going on with all those heatsinks

[NuRxG]

Thats cool! Mine are actually not dyed tho

But i was wondering if i could dye my white ones, i might give it a go.

[Venom121212]

Just painted? Dipped? Don’t leave me hanging like that man!

[NuRxG]

None, they came black, theyre not fivestars i guess? If you look close you can see the trough hole is a different size

[Venom121212]

Yeah they’re the precursors to the fivestar that used a smaller axle size. That’s only the second set I’ve ever seen unless you bought them off someone here

[NuRxG]

Bingo! Bought an old board for 25$ but its trucks were destroyed, so instead I’m salvaging & upgrading all the parts i can.

Really regret selling off my old ATS.12 trucks when i upgraded to matrix2s

[Venom121212]

Pictures and Nothing Else!

[IMG_20200903_195548_883] [image]

Ayy we’re currently binge watching this

[Arzamenable]

Epic! My amazon and Banggood cart is full of these things, but I usually chicken out. Congrats on putting pixies through copper.

[Agressivstreetlamp]

thanks, The setup is deceptively simple. Really any 12v supplies work and most of the server ones are in the 60A range. I couldve also gone with the other converter. i forget the part number but its basivally a 60v 50a one , as opposed to the 96v 20a I have… though charging a 2kw pack in just over 2 hours is pretty sweet so im ok with it. the 20s build will thank my forthought.

@Arzamenable ya think a write up is in order?

[ShutterShock]

Pictures and Nothing Else!

[image]

I’m so confused. Isn’t that … hobbyking??

[Saturn_Corp]

Turnigy esc. Funny coincidence me thinks

[ShutterShock]

Pretty funny tbh lol

[kook]

@Agressivstreetlamp

@Arzamenable ya think a write up is in order?

i’m not that k00ky Mike… but yeah… please share the knowledge…

[Arzamenable]

Yeah it is. I lurk their specials on the can when I’m bored on my phone. If the mobile facing page wasn’t laggy dogshit, I would buy something.