šŸ–¼ Reply to ā€œPictures and nothing elseā€ thread_2020_summer

Media
#1600

Obviously not using medium frit. (Bare Feet)

#1601

You need to apply green loctite on the bolts. I was recommended it in the guide I post a couple of years ago km the other forum. They come without

2 Likes
#1602

Damn. Well now I know. Plus side is I have the spare parts from the last set I had in case I screwed anything up. Iā€™ve been I single blue loctite on all my other shit. I guess I just read green is better for screws this small

1 Like
#1603

Whatā€™s the number on the loctite you suggest? I just realized thereā€™s a bunch of green ones on amazon.

Edit: Nevermind, looks like the other ones arenā€™t threadlocker.

1 Like
#1604

271 if I recall correctly, but you can see it on the other forum.
You need to add it to all the bolts except the 2 keeping the hub collar to the truck. For those blue loctite is fine.
Make sure you have the 2 drilled holes km the truck hanger.

1 Like
#1605

@torqueboards

Gimme those fā€™n wheels!! :moneybag: :dollar:

5 Likes
#1606

Bruh theyā€™re so chonnkkyy I wanna ride them lol

1 Like
#1607

@MYKC @ShutterShock I think they are like 1lb heavier per wheel. :laughing: :rofl: :joy:

6 Likes
#1608

image
image3024Ɨ4032 3.68 MB
image
image3024Ɨ4032 2.96 MB

3 Likes
#1609

937g = 2.06 lbs *4 = 8.24 lbs = 130s
571g = 1.25 lbs *4 = 5 lbs = 110s

90mm to 110mm = 20mm difference = Huge difference
110mm to 130mm = 20mm difference = Huge difference

5 Likes
#1610

I support this math and think the weight difference is well worth itā€¦ they are a whole different beastā€¦
So mucho mAs MoAR z00mz plz gib ā€¦
:penguin::dash:
:chocolate_bar::100::doughnut:

4 Likes
#1611


@Vanarian

whatcha makinā€™?

4 Likes
#1612

penguin fartsā€¦ musta gone to Tommyā€™s!!!

2 Likes
#1613


Looks nice bro itā€™s time for those tires to make love to the cement :call_me_hand:

1 Like
#1614

Dude that mount is so freaking skinny o.O

How is that gonna hold up?

3 Likes
#1615

soon my friendā€¦ I have to weld up the motor mounts and finish the motor cross bracesā€¦ sheā€™ll see pavement tomorrowā€¦

uhhhhhm have you seen any other 3-link threads? any casualties?
donā€™t be askeered, Iā€™m notā€¦ itā€™s cromolyā€¦

hahahahaha

:call_me_hand:t4: :doughnut: :doughnut: :call_me_hand:t4:

4 Likes
#1616

Guilty :man_shrugging:t2:

Good that itā€™s got your confidence though

Ive lost interest in esk8, barely check most threads anymore :grimacing:

Anyone WTB kids see boosted lmao

1 Like
#1617

fear notā€¦ Iā€™m adding a second motor cross brace that others have notā€¦ Iā€™m not askeeredā€¦ and for those of you with a clever discerning eye, Iā€™ll be moving the mount to the outside of the axle collar, I just needed a tight friction fit to get motor angle correctā€¦ with a couple of tools, and spacers I can vary track-width 20mm!!

science
:wink:

1 Like
#1618

those large dia alum. hubs/wheels are the worst things EVARā€¦ research skullboardā€¦

unless you enjoy riding the the Flintstones didā€¦

#1619

You gonna part her out? Put my name on ALL the electrical and battery materials you own btw

Also why no more skating

2 Likes