Thank you! It is coming together quite nicely.
3 Likes
How wide
3 Likes
I’m thinking bout 320. Lol.
In all seriousness, I need direction from the more experienced. Going to be on a 44 with a DS enclosure. Already have the 100D and the P42a cells. Need to figure out motors, drivetrain, and hangers. Could go 4wd as well. Waiting on motors until work out the exact battery plans.
Will have multiple other boards that can do 40mph. Want something that knocks on 50mph.
3 Likes
Are you trying to recruit a tester for your trucks?
3 Likes
Agree with this. Worlds better.
2 Likes
Soon you will be ready for the zombie apocalypse 
2 Likes
Totally. Just needs some spikes 
4 Likes
Ooh the lens flare…
3 Likes
Obviously not using medium frit. (Bare Feet)
You need to apply green loctite on the bolts. I was recommended it in the guide I post a couple of years ago km the other forum. They come without
2 Likes
Damn. Well now I know. Plus side is I have the spare parts from the last set I had in case I screwed anything up. I’ve been I single blue loctite on all my other shit. I guess I just read green is better for screws this small
1 Like
What’s the number on the loctite you suggest? I just realized there’s a bunch of green ones on amazon.
Edit: Nevermind, looks like the other ones aren’t threadlocker.
1 Like
271 if I recall correctly, but you can see it on the other forum.
You need to add it to all the bolts except the 2 keeping the hub collar to the truck. For those blue loctite is fine.
Make sure you have the 2 drilled holes km the truck hanger.
1 Like
Bruh they’re so chonnkkyy I wanna ride them lol
1 Like
937g = 2.06 lbs *4 = 8.24 lbs = 130s
571g = 1.25 lbs *4 = 5 lbs = 110s
90mm to 110mm = 20mm difference = Huge difference
110mm to 130mm = 20mm difference = Huge difference
5 Likes
I support this math and think the weight difference is well worth it… they are a whole different beast…
So mucho mAs MoAR z00mz plz gib …
4 Likes