Sure.
nopeā¦ I got nuttinā¦ except what I posted aboveā¦ I was curious if your motor pulley went all the way to the shaft stepā¦
I donāt think a rock hit itā¦ my guess is something lodged in your belt or something and the shaft twisted off at the stepā¦
Yeah thatās what I thought too. But it must have been such an easy break for me to not feel anything. I guess the momentum of 100kg going 25 was enough to snap it clean off
ā¦It does indeed seem weirdā¦
Emailed APS about my brand new remote that is wired backwards and about getting a new shaft. Wish me luck. Going 10s in a few days too so my new pulleys are also on the way. Not a huge loss
Lol all that gear and no knee pads
Rockin the shorts
DRI BMS?
Super secret sneak peek
Maybe keep the charring on a secret hardware just as secret
A sneak peek of a fried D140?
Shit!
they are on to me
An 18650 wonāt fit in there unless you remove structural supports which I wouldnāt remove.
An 18500 or a 14650 both fit great. A 14500 will fit right in the AA holder.
all the structure will be replaced by a tube structure for the battery and a rounder (actually elliptical) handle with MOAR infillā¦ we both want ultimate crash survive-abilityā¦ itāll be an all new caseā¦ no frillsā¦ a basic switch, Iām working my way through a low tech mechanical battery disengaging switch, no charger section, no USB, maybe an SOC but maybe notā¦
a simple remote that you wonāt have to think about for a year
fuck yeah, rock on
Robot underwear skid marks, nothing to see here
I trust you change both sprockets and the chain when that happens
I did not.
The chain itself got replaced not too long ago because the old one was all banged up and some links were stuck which I couldnāt bend out. Never saw any wear on it aside from that. I think Iād burn though many 9T motor sprockets before the chain starts to show wear.
itās your board and your budget brotherā¦ and yeah the wear is understandable, think of the pinion speed and contact area
This actually hurts