Hi
I have a problem with one of my two maytech MTO6374-HA-C motors when I stop accelerating it stops almost immediately.
The other motor continues to spin freely.
As a result, it no longer heats up and goes into safety.
I reversed the two motors to be sure it didn’t come from the focbox
I also changed the bearings and the axle but the problem persists.
Has anyone had this problem on the forum and managed to solve it?
1 Like
Are your motors mounted with pulleys/gears/tires or are you bench testing?
The tests are done without the belt or the pulley.
1 Like
Upload YouTube video pls
1 Like