DougM’s Hoyt Puck V2 Pro.zip (497.7 KB)
It’s done!
Attached please find the STEP files for the new Hoyt V2 Pro puck housing. It took longer than I thought to work it up because I didn’t have the model of the exact guts but fortunately the PCB wasn’t significantly different. But there were some minor gotchas that caused me to have to make quite a few revisions before I finally got it right.
It’s definitely larger than the V1 but not obnoxiously so.
Please give it a print and let me know if you have any issues. Mine was printed on a Bambu using the green PLA that came with the printer. Be sure to put tree supports on the charge port opening.
On my list is to clean up the gaping charge port hole, but that might not happen for a while.
The good news, @hoytskate correct me if I’m wrong, is that the Puck V2 is compatible with the receiver V1. However, this is based on a quick test in my living room so YMMV. Don’t hurt yourself.
This is based on this SKU