PRICES DROPPED, SHITS GOTTA GO| Done with DIY, switching to production boards SALE [US]

[jack.luis]

And by production boards, I mean the ones from Hoyt and Metroboard.

Haha, but for real I am ditching my shop and my entire life in New Jersey and moving to Portland Oregon to work for Hoyt / Metroboard and I want to start fresh. So here is the wholesale clearout of my shop. More will be added until I’m fully moved out.

Items for sale
Shipping not included, $15 minimum before shipping

"Assorted Metric Nuts and Bolts $120" SOLD

There’s a lot of shit here, use the photo to see whats included. I spent a long ass time sorting every new nut and bolt in my shop. Most of these came from boltdepot or an Amazon assorted kit. 95% stainless steel with some alloy bolts in there. Caliper not included.

"24v COB LED Strip $5" SOLD

"4x 13s6p 18650 Battery $80" SOLD

These came from rental electric scooters with a bad BMS. I cracked one open and the cells were balanced and assembled pretty well. The cells are 2.5ah Panasonic rated at 10A. I got these from a friend that works at a rental scooter company and these came fresh out of the scooters and I was told didn’t spend much time sitting around. Two of these wired into a 13s12p would make for a pretty decent top-mounted 1.5kwh battery for under $200.

4x Urban Treadz $60 SOLD

one set has less than 10mi on them

"Assorted PVC Battery Heatshrink $3-$6" ALL SOLD

$3 - Under 200mm
$6 - Over 200mm

72x Brand new P42a $325 SOLD

These are already wrapped in 4p groups with fishpaper all over. two of the pgroups are welded to a 30x0.2mm nickel tab.

Trampa Phatladz Hubs, new $90 SOLD

Evolve 6in tires, new $60 SOLD

no tubes included

Primo Alpha 8in tires and tubes, used $30 SOLD

"4x 5ah 3s Turnigy Lipo 60C $80

Used only for spot welding, only ever charged at 5a each maximum, zero puff

SK3 6374 190kv sensored Motors , Used $120 SOLD

Maytech 6396 170kv 10mm shaft, Used $120 FPR FOR BOTH

2x Trampa 6364 118kv used $25 SOLD

70T Pulleys for Trampa Superstars $30 SOLD

66T Pulleys for Trampa Superstars $15 FOR BOTH SOLD

8x Kegels, used $60 FOR ALL

Angular Contact Bearings $10

16s 10A **LIFEPO** charger. $40

GT2B remote with 3dp mod, Used $50 SOLD

13s Daly BMS 15A/8A $20

13s Daly BMS 30A/15A $20 ea

Trampa bindings $25 SOLD

FREEBEES

You get one or two freebees per purchase over $20, shipping not included. I will cross things out as they’re taken.

the big outer bearings are rusted to shit. If you can get them off these will function great as beater sensorless motors.

they all have tubes

large random assortment of trampa springs and retainers and stainless hardware. Red ones are taken

More will be added probably, please change the subjects of your PM to the name of what your buying, separated by commas

[worldismine772]

whaaaat

[rusins]

Didn’t you hear the news?

@hoytskate

[Kai]

Congratulations again, that’s really fucking awesome dude. Stick around though, or you’d be missed. Good luck with sale and everything else!

[jack.luis]

@Kai

Stick around though, or you’d be missed.

My job is to steal all the ideas I find on here, man. I ain’t going nowhere lmao

[worldismine772]

I haven’t been keeping up on insta, that’s awesome, congrats Jackson

[Kai]

Luckily all the good ones stay in the dm’s til release x)

[Evwan]

When Hoyt makes a dick shaped remote, all credit goes to me. Also those assorted metric bolts are MINE.

[PixelatedPolyeurthan]

@Evwan

Also those assorted metric bolts are MINE.

@jack.luis

Metric Nuts and Bolts $120" SOLD

[Evwan]

Yeah I’m the one who bought em

[PixelatedPolyeurthan]

@Evwan

Yeah I’m the one who bought em

lucky. no one realises how much bolts are in every size and length. having stock it heaven

[Evwan]

I usually just steal shit from Jackson, but since he’s leaving for the dark side I’m just gonna make sure I have enough hehehe

[Kai]

I generally just by 100 or so whenever I run out of a size.

Except m4 and m5. Those are too widely used. So I have 1200 of those.
…I only loctite the corner bolts on my enclosures…

[Nacho]

@jack.luis

Maytech 6396 170kv, Used $150

What’s the shaft size?

[jack.luis]

10mm

[Fosterqc]

Neat freebies!

Maybe someday you’ll move back across the country to open the east coast wing of Hoyt st.

[Evwan]

There is a Hoyt street in Brooklyn, NY

[Paul77]

Damn!!! That really cool. Congratulations on the life change!

[frame]

@jack.luis

moving to Portland Oregon to work for Hoyt / Metroboard

congratulations!!1!

[Creavenger]

Congratz @jack.luis awesome that you are persuing the thing you love, wish you all the best for the move