They’re a solid retailer. I preferred them to monster scooter parts when I was messing around in the scooter world. Dude is super helpful and understands electronics control decently well.
Your wheel walls may bulge a bit over the rim though.
They’re a solid retailer. I preferred them to monster scooter parts when I was messing around in the scooter world. Dude is super helpful and understands electronics control decently well.
Your wheel walls may bulge a bit over the rim though.
I’m thinking of making an excel sheet to help determine what tires have
good grip/ bad grip - last long/don’t last long
i also want to learn to use excel better I forgot all the commands
Also, in your opinion, what % of the time does Good grip= last less long with the most common tires?
0 voters
Thanks for all these valuable info (hub/tire dimension have always been mysterious…).
As (past) mountainboard maker, fighting against weight, the 4 x 0,5 kg = 2 kg overload on a 6 kg board has always been a nightmare…
And being able to order from tires manufacturers (Cheng Shin is a large corporation that don’t care much about mtb) was really tricky.
For heavier E-boards, it’s a bit different but the need for reliability(speed, power and mileage)/accuracy (for gear transmission) has to be addressed.
My 10 cts contribution from an old rider would be that tires are useful between 6" HP for urban ride (if it reduces the weight otherwise PU) and 9" for light off-road/beaches (above that, it’s better to get a bike or 4wd car)
Another learning is that 8 mm are not strong enough for mtb riding. 10 mm is better (and 12 mm is you want to jump)… so it’s better to use 28mm OD bearing (22 mm OD like 6900 smaller balls than 608 and are weaker regarding axial loads)
Does someone tested gear transmission on a “plastic” hub (like MBS)? I want to know if it is accurate enough …otherwise aluminium hub will be needed.
Are these the tires and hubs(april 29 post) the same as on yr profile pic…these here look like Lower profile ?Pneumatic Wheel Compendium (Serious)
No, my profile pic is trampa urban treads which are 165mm. the picture you linked to is the evolve 150mm.
Ok thanks,…looks Awesome with the evolve tires !!
What are the disadvantages of fivestars vs Rockstars? I read that Fivestars fit more tire options, are cheaper, but support a lower max psi of 50. Is the lower psi the only downside? I expect to ride 60/40 street/offroad carver, so looking at kenda 200 x 50 as offroad will almost always be packed dirt or gravel trails. Does the lower psi have a huge impact on range?
50 PSI is about 3.5 Bar which should be plenty for dirt and gravel trails, I run my tires at 2.5 bar, and I even use my board on streets quite often aswell.
Any other disadvantages besides reduced mileage from the lower psi I’m not thinking of in comparing fivestar to Rockstars for my expected use? Is there a quality or durability difference?
I dont own fivestars so someone else would have to chime in, but I dont think there is another disadvantage, like mentioned 3.5 bar makes the tires pretty hard already.
None at all. I have both sets and constantly wonder why people buy rockstar 2s over fivestars. I run my roadie tires at 55 psi with no issues.
Fivestars ftw! Plus they take dye really well so you can customize colors.
To be faiiiir, the rockstar 2s are nylon and would take dye the same
Results vary… Black seems to absorb well while other colours like Kentucky Sky didn’t work for me
That’s what I was wanting to hear from someone who owns both.
From a marketing perspective, I can’t understand why they would offer the two models with such close similarities, other than different materials offering different trade offs, but I’m not seeing that big of a difference between them to substantiate keeping both in production.
Did you double the dye like the recipe suggested? Also you used the synthetic, you should specifically NOT use the synthetic type.
I used this, all purpose and had nylon listed on the bottle.
How come xD ? That’s interesting! I didn’t double, no, and I used synthetic… Right I’ll try again soo then with your method haha
For deeper colors, it is recommended to double the amount of dye used while keeping the water, dish soap, and vinegar the same.
The synthetic version is meant to dye specialty fabrics (polyester, acrylic, acetate)
The all purpose version is made to dye cotton, wool, and silk, as well as synthetics like nylon and rayon
You will have much better results using the all purpose, I promise!
I also recommend doing them all in one batch to ensure the same color. I bought a $15 large pot you’d boil seafood in.
Aren’t 5 star rims wider than superstars?
Some drivetrains arent made for fivestars. Particularly gear drives
Not sure on superstar dimensions but here are fivestar
@moon says as hes shipping me a gear drive for my fivestars…
My gear drive is fine with them