Parts Sale: Stormcore 60d, pcbs, trucks, pulleys, motors

[Laserwolf]

Subject: [US] used and new diy esk8 parts

Xcell Helios wide rims with new bkb tires and tubes

Description: For sale is a like new set of xcell land surf wheels and tires. Wheels have very little use. One has a small knick. These were $550 new for the set for just the wheels before tax and shipping.

Price: SOLD

Lacroix titanium motor pulleys

Description: new unused
two sets of motor pulleys available.
Titanium construction
Retail price was $90 per set.
16t and 20t available.

Price: $60 per pair.

Lacroix pcb
Description: lacroix battery pcbs. These accommodate 5p modules. 10 boards available.

Price: $10 for all 10

Lacroix aluminum headlight mounts
Description: aluminum mounts for the lacroix headlights

Price: SOLD

Landsurf wheel nuts.

Description: landsurf xcell wheels nuts. Red ano. New.

Price: SOLD

V3 boosted board trucks. Includes motor mounts, baseplates and skid plates.
These are actually pretty legit trucks. Forged construction and thick anodizing. I currently have a set on my loaded omakase build. Does not include the wheels.

Price: $30 for the pair.

Boardnamics 220mm hangers

Description: set of bn hangers. New but one of them was mounted

Price: SOLD

Boardnamics motor mounts

Description: selling a set of bn motor mounts with idler pulley

Price : $SOLD

Kegel pulley

Description: 36t pulleys for Kegel wheels

Price: SOLD

Bkb tayto enclosure

Description: enclosure for the bkb tayto. Use it for your longboard or shortboard build. Can fit a 12s3p 21700 pack. Includes mounting hardware.

Price: SOLD

Stormcore 60D vesc

Description: Stormcore 60d. Came with a board I bought. Around 400 miles on it. Ready for a new deck!

Price: SOLD

Lacroix Flipsky vx1 remote and receiver

Description: used but in pristine condition
Includes remote, receiver, and cable.

Price: SOLD

Generic d profile pulleys

Description: 10mm d profile pulleys. 13 tooth. Set of 2

Price $10

Generic 5755 brushless motors. 2 available

Description: generic motor. Good for 50amps continuous. Sounds super nice and smooth( can send video if needed).

Price: SOLD

Hoyt st drivetrain

Description: Hoyt st drivetrain complete with motors, trucks, motor mounts, motor guards, belt guards, and pocket rocket motors. Retail on this is $800

Price: $500

[Venom121212]

@MacKeeper28 xcell

[MacKeeper28]

thanks for the ping! I’m looking for the xcell tires tho

[Laserwolf]

send an offer

[Laserwolf]

send an offer for the tires

[haven]

maybe interested in the landsurf nuts… what thread size do they fit on?

[Laserwolf]

Hypertruck thread pitch m12x1.75.

[Laserwolf]

bn 220mm hangers are sold

[Shadowfax]

@Laserwolf

Xcell Helios wide rims with new bkb tires and tubes

Description: For sale is a like new set of xcell land surf wheels and tires. Wheels have very little use. One has a small knick. These were $550 new for the set for just the wheels before tax and shipping.

Price: obo

Friendly reminder, obo listing is against forum rules. You must post a price.

[poastoast]

new post

69 characters

obo

[Shadowfax]

@poastoast

new post

69 characters

obo

something that lives rent free in my head is when dj chicken strips was talking shit to you and said “fucky wucky uwu”.

I think about that at least once a week

obo

[Laserwolf]

Will update

[poastoast]

and he thought that’d be an effective insult!

[Laserwolf]

Get it while the getting good fellas

[SalamToU]

Ok, please someone help, i keep looking at this tayto enclosure, does anyone know if this will fit a 12s3p with 2 tb6? Cause i was looking at the ubox and that bitch is tall asf. Pretty sure theoretically itll fit, but tight, so anyone with experience with the tayto enclosure would be great.

[Laserwolf]

What are the dimensions on the tb6 esc? I can measure it out for you.

[SalamToU]

Thanks, im still debating which esc to go with. i dont currently have, and i may get something else if the stars align so dont go out of your way to take measurements if your stuff is packed away.

The website says,
80mm Length x 70mm Wide x 18mm Height.
Thats for 1, so im assuming itll be 80x~140x18.

[Laserwolf]

Looks like someone else has done it. There’s a bit of extra height so if you were to stagger the p groups into more of a triangle you could probably gain some more room.

[longhairedboy]

I bought those rims, showed up not too long ago. they’re going to look sick on my flux.

@Laserwolf Is everything sold?

[Laserwolf]

Almost all sold. Few parts remaining