@Ahil
I put together a rear 3-link DH base plate setup with the esk8 axel and motor plates mounted out the back.
It is tidy an looks like there is room for small motors while not compromising function.
16 Likes
Time until someone asks if dual 6380 fit in there…
3…
2…
1…
11 Likes
0…
There’s gotta be a way to go NKP rear mount big motor. We have the technology!
3 Likes
one foot long 1/8" motor mount
4 Likes
I finally got to ride my set…for only 5 min tho. Ive had issue after issue. Lights not fitting, motor shafts getting in the way, not having the right size bearing or allen not to mention the rain. But finally I tried them and O-M-G!!! The control and stability. They respond so well even at speed and my turning is limited only by wheel bite. But wheel bite will never really be an issue unless i feel like doing a super sharp u turn. After 5 min a motor blew. Turns out some metal shavings got picked up from my shaft cutting and ughhh… time for a teardown and rebuild. @MoeStooge you should be very proud. An amazing and innovative product, thank you!!!
16 Likes
@Bobby Sorry about your troubles. Glad you like the truck. Hope you have a longer go on your next run.
3 Likes
Is the axle metric?
2 Likes
10mm yeah (9.8mm)
2 Likes
Now I’m more confused than before
2 Likes
6900
2 Likes
My mbs hubs require 28mm od…16100rs
1 Like
Wait, but did that wacky wheel I gave you work?!
28mm OD bearings are available with both a 10mm and a 12mm ID so you can use MBS and Metro, etc hubs on various axles
1 Like
Not to make confusion. I can assure everyone the axel spindle size measures .3880"
(Shhhhh! Takes a 10mm bearing.)
4 Likes
Surr did!!! Thats how i hot to ride for 5 minutes lol
1 Like
Thanks but at that price id rather just go thru amazon
2 Likes
Ernesto sells them for $20/set
2 Likes
Oh wait. You’re talking motor bearings
1 Like
eBay also, I just used that the show the part numbers and what is available, they also have solid works 3d files of all the parts if you are rendering 3d assemblies
1 Like