Alright.
I plugged and chugged and made some good progress this evening.
I carved up and poked holes on the junction box.
I then proceeded to attach it to the deck.
I am using 4 threaded inserts with M5 bolts and Butyl.
There is some gasketing under to dampen impact and deal with the concave.
And some butyl to hold it all down.
Then I broke out the big drill bit and punched some big holes through the Deck…
I just recently got my first corded Dremel. And it is sweet. I had been using an old failing battery one for a long time…
I got some help from the little dude.
I went on to put in some more inserts for the abs sheet that will protect the cables.
And then I went on to start messing with and taping down the cables.
And look at that. Cables up in the enclosure.
And finally more gorilla tape.
The pannell will have to wait until I get some M6 bolts for the inserts ob the Tommi Boi.
It’s really getting close now…
But I have to redo/extend the phase leads on the Unity…
And that is where I decided to take a break.
