Maytech 6374 170 kv motor with bad sensors

[deucesdown]

@b264

I’ve had this happen multiple times with various motors and just ran them unsensored.

@b264

I never run FOC mostly because it’s too quiet and secondly because it’s harder on the electronics and thus less reliable.

Those wireless remotes are pesky and prone to signal problems. Run a hardwire throttle/brake.

BTW I’m with you on sensors, those damn 24ga wires and PH connectors… And with potential to fry the vesc or toss you off the board. And on FOC vs BLDC. For the most part. But every now and then I plug the sensor wire in again, can’t help myself.