Maker X Bluetooth module cant load Firmware.??

[jaykup]

If I had to guess, the bluetooth module is either faulty or doesn’t have firmware on it.

You can try to flash it manually

NRF51822 Flashing / Setup in Windows using a STLink V2

NOTE: You can use your VESC to do this whole think a lot easier. See video below: https://www.youtube.com/watch?v=PFFiVxFHDM4 How to do it the hard way: After some issues getting mine setup and working I thought I’d post a guide of how I did it. Please do double check pins with what your board/programmer lists as they could vary Also there is a guide here if you want to follow Vedders guide:

Vedders Guide:

<a href="https://github.com/vedderb/nrf51_vesc/blob/master/README.md" re…

Process is the same for the NRF51 and NRF52 chipsets, but the firmware is different. Just verify which chip it has and load the right firmware