Hi guys.
Located in Germany/Europe.
Already have found some parts in my „inventory“.
But still need more specific stuff. And I don’t like to buy it new, because I know, many of you guys have the same „problem“ like me and got stuff laying around, that’s collecting dust. Especially these parts I am looking for. Nobody really use it anymore in DIY.
It’s going to be a bit like my start to this beautiful sport in 2015. Just with better parts and much safer. Target is a DIY-Evolve.
I will be using Carbon GT decks and DKP‘s with Riptide bushings.
- Small battery
- Small motors
- urethane 80mm and a possible 2in1 option for the future.
- Trigger Remote - Zmote (Trigger is for me the most intuitiv)
- Reliable ESC, like a MakerX DV4S.
Low speed with different modes to step up from time to time.
I am looking for following parts: - Motor mounts for Evolve DKP (fitting 6355/74) (need 4x)
- maybe some additional DKP‘s for some decks I got laying around, just for some kids in the neighbourhood to learn the feeling on a board
- Kegel drive gears 36T or any other T count (ideally aluminium, but not necessary) (need 4x)
- Zmote Trigger remote (need 2x)
- 6355/74 motors 190kv or higher / 8mm shafts / BH, e.g. Flipsky (need 4x)
- MakerX DV4S (would be my favourite - need 2x)
Also got some parts, I would trade, if somebody is interested.
- Radium 6355‘s (2xnew/2xused) / 6395‘s (138kv/145kv) (used)
- SRB HD 3-links (new)
- SRB Drive hubs (used)
- different BRP‘s from the UK (TaylorRC - new)
- LY EVO deck with DS enclosure (new)
- SKP 18s charger (US version-new)
I know some of the parts are not that common and laying around often. But thought about asking here first before buying new. But the DKP stuff is outdated and often not used anymore. Also motors like Flipsky have a high possibility just laying around.
You got some parts for me and want to give them a chance of a second life for future riders? Hit me up and let’s go.
Cheers guys 