Lacroix Jaws 2.0 version power button inop yet VESC shows powered on. (Blue light shows steady) & small square shaped box attached the the bms (battery protection circuit board shows pulsating red…

[glyphiks]

LACROIX Stormcore ESC and iOS app info

This 100% Always go by the voltage of the cells. They should be close to 4.2v each at full charge. Total battery 50.4v. They’ll never really reach 4.2 in my experience, after charging, good condition cells typically settle at around 4.18v Your pictures show the majority of your cells at around 4.16, this is basically full. I’d be concerned about cell 12 being a bit low. You can turn on the always on balancing feature to bring this in line with the other cell values and then switch back to ch…

In addition to my other answer above, the issue you are having looks very much like it could be related to the individual cell fuse that is employed on the lacroix pcb kit.

I have seen fuses like those provide intermittent values exactly like you are describing, you could try bypassing the fuse to see if that helps.