Another Update…
UPGRAYYD!!!
finally got my Davega I powdercoated it purple.
Torqueboards 190kv 6380s also arrived!
Swapped out the pulleys to 18/72
swapped out the 200x75 Qing da for some 200x50 kendas… 43mph weighted top speed
I’m so happy with this build right now!!!
26 Likes
How does the powdercoating work?
2 Likes
1 Like
Clean part, degrease part, make part electrostatic negative, spray gun has electrostatic positive potential, spray part with spray gun and then cure in an oven.
3 Likes
I do mine a little different.
I’ll clean it really good, then put it on the oven and warm up the part to 400f, then I’ll spray the part with the powdercoat gun, then bake at 15 min 400f.
Its called hotcoating.
1 Like
You badass motherfucker!
With that amount of truck real-estate you could insert some looong bois.
6 Likes
I hope to score a pair of the long boys!
2 Likes
What kind of range do you get out of this? Really nice upgrades there.
1 Like
@Linny it depends on how hard i ride. If I hang with the onewheels doing 15mph I can get 22-24 miles. If I run it up over 35+mph I’ll get 10-12 miles
4 Likes
do you have a fast charger for it?
I’d be maxing this out every ride for sure!
1 Like
I have a yzpower charger that was supposed to be 8a, turned out they sent a 4a. I need a better charger for group rides
Damn… That’s what I’m missing. I’m getting my Davega on my board today. Nice job dude!!!
4 Likes
So tell me about the stretched out Kendas
Do you like them.
What tubes are in there?
Did you have to balance these wheels?
Do you use slime in there?
2 Likes
Love the stretched kendas!
I have the regular 200x50 tubes in there.
Zero wheel balance, yes I have slyme in them. They hit 40mph with no wobbles!
2 Likes
Hey everyone!
Thanks to you,
this build won 3rd place for Build Of The Year 2020!
I really appreciate everyone that helped it win!
I won a bunch of cool prizes and just wanted thank the sponsors for Hooking it the Fuck Up!!!
Seriously!!!
@JJHoyt is the man! He hooked it up with a brand new Hoyt st Puck remote and receiver!
This was by far the most lacking element of my build, I couldn’t have won a better prize to upgrade this build!
As more prizes arrive, I’ll update
18 Likes
Congrats Jeremy!
5 Likes
Hey guys, the post man just dropped off some more cool prizes from @SabreDynamics and @Lacroixboards. Just want to let the sponsors know they are greatly appreciated!!! Thank you!!!
15 Likes
So, im curious, how well does it carve? Ive just gotten together a hypertruck/trampa hs11 build and ended up putting a riser in the front to combat an almost sloppy/choppy carve(it wasnt smooth at all, it felt really unbalanced as you leaned). Ive seen a few similar but no one has any issues, nor risers. So im wondering what ive done wrong or different.
3 Likes
Do you have some pictures of your setup?
1 Like