Yes, and it passed. It also spins up during detection, so not dead as he thought.
@Chingiz is that a flipsky ESC? I got that failed flux linkage BS when doing motor detection with some flipsky 6.6s. Same exact exact issue, one motor didnât spin and tried every firmware version. I ditched those ESCs and itâs been running fine on focboxes. If thatâs a flipsky ESC I can almost guarantee thatâs the problem, and the motors are fine
updated to the latest version, i also dont understand why this motor dont work with hobbywing esc only one motor second one work perfect
it the SAME motor
yes its Dual FSESC6.6 Plus based on VESC6 by flipsky, also i tried it with boundmotor vesc and hobbywing esc, work only one motor, but today i tried with winboard esc all motors work
so flipshit v6, boundmotor v4 and hobbywing all doesnât work, but only lingyi works? thatâs pretty weirdâŚ
Have you verified the resistance between all 6 phase leads?
Try this and see what the result is