Tried that version already and it didn’t work.
I’ve had success now with the file @jaykup put up. Will try link it here…
Click on link and scroll down to file labelled:
(MakerX_DV6_PRO_5.3_UNOFFICIAL_jaykup.bin)
It still did some weird stuff and I thought it didn’t work but went ahead and did the other side of the esc anyway. Got some strange freezes and thought it was stuffed. Then couldn’t seem to connect to vesc tool at all. I turned everything off and back on and it was updated. Ran motor detection and all working. Still yet to test ride.