GIVING A DINOSAUR A NEW LIFE

[Dinnye]

Molicel P42A – Max Pulsed Charging Current Specs (for regen settings)

An update… E-One Moli, NPE, and I have been discussing the criteria used to set these pulsed charge and discharge power limits. They are the max discharge/charge power levels and pulse lengths you can run at, based on state-of-charge, before the cell reaches its recommended limit of 4.2V (during charge) or 2.5V (during discharge). According to E-One Moli, if the cell is kept within these voltage limits there is no expected impact on cycle life, capacity, or internal resistance when running at…