I should’ve made you pick the highest kv ones for me
I don’t think anyone has documented how to do this yet.
is it go max speed and divide ERPM by poles?
AFAIK its either
Volts = Power / Current (Bat)
Effective Volts = Volts * Duty Cycle
RPM = ERPM / Motor Pole pairs (7 usually)
kv = RPM / Effective Volts
or just rpm/voltage
That’ll give a rough idea of KV, but will be skewed up from stuff like friction losses.
I think the more correct way to measure KV would be to spin at a known speed and then measure the output voltage.
In the tool, isn’t it just going to the terminal and typing:
kv
divide the result by either poles (14) or pole pairs (7)?
I forget, don’t have one to plug in at the moment, one of the results will be close to the rated kv, the other will be off by approximately a factor of 2.
Pretty sure it’s just calculating based on flux linkage and resistance as per this
Pole pairs
Upon talking to alibaba sellers and annoying them with my questions I found this manufacturer
3 japanese bearings
Special purpose magnet glue instead of epoxy
Top and botoom metal magnet retain ring
6061T6 can
Really good price
Cons
Seems like a high resistance 0.05ohm
Maybe a smaller than usual amount of windings, 9 of them??
Seem to be loud in the video
They also appear to have a dual VESC6 based ESC with a built in switch for $200
And they have these CNC trucks?
you wanna try for science
Since 3 sets of maytechs failed on me, I might try as they seem better to me than flipskys tbh
@Anubis cant find them in the shop
yeah
personally the new flipsky line seems to be rather good
The trucks arent in the shop, but they’re pictured in places
so tempted… why you gotta do this to my wallet!
Those trucks look nice, and they use mbs shock blocks apparently.
Do you know where they’re coming from? I couldn’t find anything at a cursory glance.
The motors look pretty cool, kingpin on those trucks looks pretty thin though
Nope, just hoping someone will find out.
Have you guys seen their national racing event?
Too bad there are no videos
Yea, esk8 and PEV has a huge “hidden” scene in china. They were using EUCs for about 3 years before anyone in the west, the best stunt riders are all chinese. There is also a pretty big russian esk8 scene we don’t get to see much of.