.extending senses wires or comm

[Aeromech787]

Is it wrong to extend senses and Comm and CAN wires . If not can I just make one up of JST connectors male to female or just solder a length in there. Guess I’m worried about loss of signal.

[J0ker]

How long you talking? I have two focboxes right next to each other with about 6" worth of canbus cable between the two. No issues.

[Aeromech787]

Yeah maybe 8 inches about the same for the sense wires

[J0ker]

You’ll be fine

[Aeromech787]

Thanks

[SammyG]

What about extending the three motor wires and sensor wires by 3 feet?

I know this is a weird question… check my build thread.

AWD 100kv Maytech hub | 10s5p | Flipsky 4.12VESC

[image] [image] [image] Working on getting angles and scale right so a wider range of people can fit on it than just myself. This is just to get an idea of the final angles and work out the kinks before I model it in Solid works before I order the veneer and cnc the molds for vacuum forming. Had a break through on the steering that should make fabrication about 33% easier so that’s rad. Adding this link for future reference.

Thanks in advance.