[EU] baby's comming garage sale

I need space for a baby that is comming, and also time, so sending some goodies to the world. if you’re interested in anything or any part of below that is still not sold, hit me a PM. if you think some price is too high, give me a resonable offer :slight_smile:

this post has been updated, since I’ve tried to sell these parts in two sets before. I also keep it up do date.

shipping in the EU with PPL, sending from Prague. Payment with IBAN. Shipping prices not included


Item: RedEmber 44
Description: chiseled channels for motor cables after road-side enclosure, and few cable attachments
Price (EUR): 280

images




Item: 4WD 3DServisas gear drive drive train
Description:

  • 4WD 3DS gear drive 1:3
  • 275 mm hangers, 8mm axiles
  • adjustable baseplates
  • 3DS hubs
  • Reacher 6385 173kv (no sensors, MT60, sleeved)
  • 4x 8" trampa threads with few kilometers on them with tubes, already installed

Price (EUR): 1200

images



Item: 12s4p p28a with flexibms and two XT90s
Description: single layer of 18650 with second layer in the middle. flexibms on top, with CAN leads. boxes included :smiley:
Price (EUR): 320

images





Item: 12s6p p42a, unity + metr
Description: @3.3v, GT2E remote + receiver, spare unity switch
I couldn’t connect to the neptune, I planned to swap it for the flexibms, but never got to it
Price (EUR): 520

images





Item: 2x trampa HD60
Description: I remember having more trampa switches, but I cannot find them. I suppose if they get sold separetly the first person gets the switch. I’ll add a long CAN I used with them
Price (EUR): 320 per pcs

images





Item: ideatb mounts
Description: mounts ideatb with brace, v7.8, with idlers and a wash
Price (EUR): 110

images



Item: trampa superstar hubs 6-spoke + 72t ideatb pulleys + hardware
Description: pulleys for 15mm belts, mounting hardware and grime included
Price (EUR): 80

images


Item: flexibms
Description: brand new, with all the jst connectors
Price (EUR): 80

images


Item: GT2E remote with receiver
Description:
Price (EUR): 20

images


Item: Matrix II hangers + etoxx baseplates + spare bushings
Description: baseplates are fine. hangers are beaten, one axile is bent ~15°. I had it in the front, it made difference in tire wear
Price (EUR): 60

images



Item: reacher v4 6385 173kv
Description: one needs bearing change. no sensors. 10mm axile,
Price (EUR): 120

images


Item: super large tires
Description: ~153mm ID, 215mm OD, 66mm width
Price (EUR): 40

images


Item: tires
Description: used 8" trampa, hard compound, still have few hudred kilometers in them. + tubes
Price (EUR): free if you take anything else

images


Item: 16t motor pulleys 10mm shaft
Description:
Price (EUR): 10

images


Item: keys
Description: 3x3mm profile. 10, 14, 16, 18, 20mm lengths
Price (EUR): 5

images


Item: lots of bushings for endless tinkering + spare washers
Description: 20
Price (EUR):

images





Item: spare axile nuts and washers
Description: for 8mm axiles
Price (EUR): 5

images


Item: Bones red bearings
Description: for 8mm axile
Price (EUR): 20

images


Item: 18t pulleys for 15mm and 20mm belts
Description:
Price (EUR): 10

images



Item: wrist guards for small hands
Description:
Price (EUR): free with something else

images


:white_check_mark: sold items can be checked in post history

5 Likes

Congratulations on the new addition to the family! Good luck with your sale. Lots of good stuff here.

10 Likes

Hi, I’m interested in the Matroboards 155mm tires and tube. And maybe the RE 44deck. How much damage did you do with the routing? How much do you want for it?

1 Like

The routes are few millimeters deep so that I could fit phase wires through it. I’ll send more photos throughout the weekend

Ok. Let me know how much …also interested in the tires ant tubes.

I’ve split the post into parts. feel free to check it out

1 Like

trampa deck and bindings gone.

12S 4A charger - WIP with @Simeon
trampa superstar hubs 6-spoke + 72t ideatb pulleys + hardware and tires - WIP
2x 8" new trampa treads tires + 4x 8" new tubes with 90° nozzle - WIP by @Facko
unity from the batterybox - WIP
4x metroboard 155mm tires with tubes - WIP by @philo
one hd60 - WIP

all the rest is available

2 Likes

4x metroboard 155mm tires with tubes sold
12S 4A charger sold

uboxes WIP

all the rest is available

Super fast shipping! Thanks !

2 Likes

I’ve updated the post with available items, reorderred it, and gave it some better pictures of the parts.

also, the individual items can be arranged like this, if you have an idea for a new build :slight_smile:

varant 1 - light 4wd:

variant 2 - I want many gears

variant 3 - I need electronics, already have the mechanical

variant 4 - I’d need to get going

variant 5 - wow, is that the RedEmber 44?

also, its a almost complete with 1+2 or 3+4 :smiley: