Hello,
Since I’ve learned most of DIY stuff from this community, I had idea to incorporate esk8.news forum Logo on design I was making for a new deck.
Is it OK to use it? I would not like to do it if that would make someone who made it feel bad…
It’s for my personal board, nothing to do with selling or anything like it btw.
Who should I ask this?
Thanks
you have send your first born to @longhairedboy and if hes feeling merciful, he might allow you to use it.
Oh, great. Sorry for not finding it myself.
Anyways I’ll post it here just to make sure once it’s done.
Thanks.
Do it
You shall sow the seed of esk8.news across the land and bring forth prosperity. Any less than greatness will be met with strict punishment and thou shall be smitted and flogged with retired decks by the esk8 gods henceforth for eternity!
Do have this logo design as a computer file? Where did you get it? Can I use it?
I actually just told @JJHoyt that’s what I wanted when I bought my puck and for my griptape I just printed out the logo I saved from the merch page and took a rzr blade to cut it out on a sheet of grip… sorry @b264! WIsh I could be your knight in shining armor… curious minds want to know though, what did you have in mind on what you’re going to use it on…?
everything possible 
I was thinking something like this… I dont know if you can see it but astronaut has logo on the chest area…
Still trying to figure out where to place that red cable… But it will be close to one of those 2 positions… For sure I’ll post here the final design…
there’s a strict license fee for using the news logo. The fee consists of 1 32oz stella and one joint. Can’t be that garbage weed either, better be good or you’ll only get to put half a news logo on your board.
The first cord design but closer, like how close the second one gets or slightly more
Is the logo on your grip-tape made using spray-paint and stencils? Or did you custom order it? It’s the first time I’ve seen the logo actually look good 
Just cut out a stencil with an exacto knife on thicker paper after I printed the logo out and used a couple paint pents I had laying around to do it… @rusins
So it’s just done in sharpie? Or is it something special? Looks really good! 
Thanks brotha! Not shairpie, paint pens just from home depot and this place called mcfaddondales by my pad. I used these ones and have used them on a bunch of other things too. Work great. Last a while. Only thing that looks good and stays on grip. a Finer tip helps a lot on stuff that’s detailed or smaller FYI
