@NoWind Jens, as im not sure whats the correct word used on this forum, hence searching will be difficult:
I remember reading that those metal flappy things to make the deck wider, were quite expensive as you had them made in full cnc. But still, any plans on releasing those or similar to the public? Would be nice on my markoneboards emtb
1 Like
@NoWind
sorry if I missed it but when are those fancy two bushing wide ass trucks gunna be available?
I had a vision of them mounted on a Kaly 2.0 with gummie, 6.5, 7, and 8 inch wheel options, and bindings.
1 Like
sesat
April 14, 2020, 2:16pm
#70
gerry, i’m happy to help!
Aluminium full CNC Deck extensions aka Gaspedal aka FLAPS, are machined from billet and make your stand on a Trampa Deck sooo much nicer you cant imagine, we are totally stoked and loving it.
Machined around 10 sets already in different styles, we are testing this right now and will start next week with our favorites as a first bigger batch of 30 Units.
well as a roughly estimation of costs i will let you know this :
each Flap (4 in total) is made of 4 different parts which are machined from solid block of 7075-T6 Alloy.
All sides are complete machined to the very last what is really needet, complete 3D shaped and lightened to the maximum…let me throw some numbers : we start with 2300gramms of alloy and it ends with around 200gramms !!! so if we talk about 16 parts for a complete Board i would estimate around 10€ per part as the absolutely needet minimum … this means raw / uncoloured parts for EXPORT to non EU !
We will provide you with a JIG to bring on this Flaps in correct way and with the needet Drills / CS Stuff !
@Brently i think you just need to reach out
Actually producing 300mm Bodywidth Hangers , i think its the better size for generell Boarding
BUT of course we will have 400mm as well, just wanna make sure we are happy with generell performance in terms of steering with this truckconcept !
Its so funny how many people already contacted me for 400mm ones, you all as crazy as me (((
8 Likes
@Lee_Wright images look great. would be great if you could put up a video of the E-Toxx 5:1 Mini Drive assembly on YouTube.
4 Likes
Your power of suggestion is limitless:
12 Likes
Oh those deep dish wheels are beautiful!
Xtra
2 Likes
I’m sitting on orange v1 hubs. anthrazit looks nice.
3 Likes
Ideally I want Orange on my current build but will have to get black ones for it as Jens has no orange. These are gonna be for something special.
5 Likes
Esk8 porn right there! Gonna have to pick up a set, so exxy though. Damn you @NoWind (in the best possible way)!
2 Likes
Riako
April 25, 2020, 5:13pm
#82
So this got 3 bearing per wheels ??! And set by the inside of the rims ?!?
4 Likes
I know right? Three encapsulated bearings!
1 Like
If I can recall, they are 60mm wide, 109mm diameter, offset.
11 Likes
If @NoWind could sell orange with black E-Toxx lettering instead they will be baddddd . Devilish stealthy looking bad asssss .
3 Likes
Hey are you that fabijagi dude on Instagram? Really nice board, I have been wondering why I haven’t seen that build thread here
2 Likes