im sure everyone hear him zooming miles away
REEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
why is so loud i hope is not the same sound with my 190kv motor or i will need earplug !!
Why are your drives so loud? straight cuts? or is this just how all BN drives sound lol
I don’t have gears but my 190 kv motors can whine pretty loudly
in foc mode 190kv motor are very silent in even at 18S ,
190kv at 18S? You got a deathwish or something lol?
not so scare , my setup is very low power at 80A max battery current
sorry, these are 190 kv
but yours will be roughly 40% as loud
mine are straight, no grease, slightly lose backlash
why no grease? to avoid the mess when you open them?
that + i personally don’t find a need for it all too much
like, i put a dab on so it has a really thin film for corrosion prevention but other than that, it’s basically raw dawgin. haven’t had issues with wear or heat since imm light, tho i am a very agressive rider
That sounds nice cause I’m lazy
you mean less 40% for a dual set up
great news! theses are almost indestructible ! how much milage you put on it since ?
some like it dry, some like lubricated !
nop, i mean 40% as loud as my board
i’ve put around 1.5k miles on them so far, and at least 4-6 on my older board
3.95 ratio straight cuts, 12s, 170kv, 2wd. It’s not quite on @poastoast level, but it’s close.
PSA - 21t straight cut pinion requires extra DIY dremel work to get the correct backlash.
i wondering if helical like me is quieter
Helical is quieter but still makes some noise.