Belt slippage/Loose motor screws

Hey guys former torqueboards fanboi, and full time newb here.

I had an issue over Thanksgiving where the 4 bolts connected to the motor would slip and cause the belt to come loose.

Must have tightened and retightened the thing 5 times in 3 or 4 hours. Realllllly looking forward to that TB or BKB gear drive.

Any tips for how to eliminate or reduce the issue? The loctite didn’t do the trick unfortunately…

34 posts were merged into an existing topic: Noob question thread! :grinning: ask your questions here!

Bahahahaha!

1 Like