Beginner Question Thread! 2023 Edition

[jaykup]

I followed the “hard way” instructions here for a few 51822 modules and it worked well. Same process on the 52840 just different firmware.

NRF51822 Flashing / Setup in Windows using a STLink V2

NOTE: You can use your VESC to do this whole think a lot easier. See video below: https://www.youtube.com/watch?v=PFFiVxFHDM4 How to do it the hard way: After some issues getting mine setup and working I thought I’d post a guide of how I did it. Please do double check pins with what your board/programmer lists as they could vary Also there is a guide here if you want to follow Vedders guide:

Vedders Guide:

<a href="https://github.com/vedderb/nrf51_vesc/blob/master/README.md" re…