these are the cells apparently. someone says this is not it.
@Flasher I was hoping to use the spim08 cells in there because they are the most susceptible to damage so they could actually take advantage of the super strong box unlike cylindrical cells. They would also be able to dump their heat into the case very effectively, hopefully I find a way to fit 24 in there.
The BMS was so huge (33mm tall), taking it out gives enough room forx VESCs and a new BMS.
I also realized the bluetooth BMS prob would not work inside the metal box so I had the idea to run them on the outside and use the pins in the case to transfer data in and out. There are 8 pins, 4 are needed for the BMS leaving 3 for a PWM signal and 1 extra.
Batteryhookup! I like their attitude and drive. I’ve got tons of the fancy bms that came with the cells i got. They probably cost more than the whole battery new but they’re huge and don’t know how to use them
I actually haven’t taken any apart and @evoheyax was doing them. Together we spent 4000$. Damn u batteryhookup. Have to make more vehicles. My selling them with the pcb was the plan but with no marketing and no decks at the moment to go in they just sit here. But decks will come.
This is the connector I need to desolder to use the ribbon cable.
See the case? yesh those bolts came out with pliers not screwdrivers. Smallest torx ever would be needed.
I put the BMW 16s pack in my City Coco scooter. It was so fast and went like 40miles or more. Then the stock 1000w 30a controller died. Totally worth it. Now to vesc it up. lol
the bms probably works though no? i assume all the ones i have work but just dont have a guide or use. i forget the brand but top quality stuff and huge. somewhere someone wants it
it would require some secrets to activate I think, I meant if the battery was working out of the box. Plus with taking it out I get room for stuff, get to add bluetooth.
I would rather invest my time into trying to make the world’s first water-cooled Esk8.
ha. to cool the motor? gunna have to be a tiny motor to be worth it. but i have a hole in motors i make with that possibility. with the hotter hubs. one day we should figure it. one day i get tires, wheels, and hangers finally here