Archived: the OG noob question thread! 😀

[b264]

How to bind the Mini Remote [Serious]

The 2.4GHz Mini Remote is my favorite transmitter for esk8. (buy from amazon)(buy from UK)(buy receiver only from AliExpress)(buy from AliExpress) To bind a receiver with a transmitter, you can follow the steps in this excellent video from @torqueboards [How To Pair 2.4ghz TorqueBoards Mini Remote Controller Instructions Tutorial] I’d like to add that there is a failsafe trigger position (the throttle value used if signal is lost briefly). To set this, you leave the receiver and…

512×512 73.6 KB

Originally published at: http://esk8.news/how-to-ackmaniac-esc-tool/ [Ackmaniac Firmware & App] It seems there are some issues with the newest VESC Tool (as of 06/20/2019) including the absence of an ERPM limit for direction change (reverse) and unusable values applied with the motor setup wizard. After a recent discussion with Trampa, it appears that feature requests are equal to “You are all very good at complaining instead of actually be thankful“. With that being the case I figured…