It wasn’t, that one is cooler looking and more robust looking than the one I picked up. One I got believe came from China and was similar to the 50V ones on Amazon just bigger (higher voltage I mean) capacitor believe the IC is being pushed near it’s limits at 60V but it works and figure worst case my lights blow out.
Will try to find the link and post here too
https://www.amazon.com/gp/aw/d/B07QMQQ4NG/
I’m only running 10S so at max it’s getting 42V input.
Says 48V in the name but description differs and I looked up the chip think it supports up to 60V itself.
Main difference between one I linked and one you linked is the screen and 7A output on yours vs 3A output max on mine but my relatively small low power light barely draws anything think it was .015A or 15mA at 35V (bench power supply testing) so about .6W, output is set to 5V for Arduino and lights so only about 120mA output needed.
Some more details when I was hooking it up here
Granted testing there was with patterns of 5 small LEDs on and off but would say check actual draw to see what is needed if possible.