Go bn270
You might get wheel bite I think with my axis with TB218 on 6x2clevers my back foot was right on the wheels
190kv
Definitely bang for your buck 
I was really hoping that 220mm are wide enough with this board and wheels combination. 270mm just looks too wide. Is there such a thing as too wide? Getting 220mm from @Anubis while they are still in stock seemed like a nice option since I am in Sweden. And how about 230mm or 240mm FatBoy hangers? Price is holding me back from those but I might consider it.
The only reason why I am considering 6454 is because pair of those is almost 1 kg lighter (980g x 2 - 540g x 2 = 880g).
1 Like
You can try 220 
or you can do 270 in the back and
220 up front or maybe @mackann has some old stuff laying around 
he’s the El jefe DUDE of esk8 in Sweden good luck watching this thread
(3dser stuff is the best in the market but you need gears he doesn’t make clamps 
for belt drive motors)
1 Like
Decided to risk and try to fit Whooshboards mounts on Fatboy 230mm. Updated post images with new parts.
1 Like
Motor mounts arrived both for this one and my old build 
It seems that caliber clamps have a pretty good grip on Fatboy hanger. Nothing moves. I might try to add some extra support on the curved side though.
3 Likes
Looking good
love the raw fat boys can’t wait to see it all mounted up on the board
1 Like
Curious why you didn’t do drop through, did you have wheel bite?
Might just be my bias towards drop through haha
1 Like
On my axis my back foot was right on the tires kind scary but I love it low my next lowrider
My hummie
5 Likes
Oooof love the look of TB110s but don’t like thanes 
1 Like
I am still gathering parts so not much decisions are made yet. So I might go drop through. I just wanted to see the board with wheels mounted. But I should mount drop through to test wheel bite. Currently busy trying to remove old motor mounts and motor pulleys from my first build.
2 Likes
Which enclosure is that?
1 Like
Which one the sportster is from Bustin it’s abs having issues trying to put my10s4p it’ll fit I just have to get a smaller BMS
1 Like
And the hummie is kydex from John @hummieee
I really like how it molds to the board Don’t know on longevity yet but really like Kydex for the money
But the best is fiberglass I would hit up @BigBen he might have something that will fit
I know the axis Is pretty flat with a little bit of (concave)arch on each side so it shouldn’t be that hard to find a enclosure just measure to make sure
2 Likes
Yes if it works you’ll like it 
Plus I feel more control when I’m in drop through mode
I AM ONE WITH THE BOARD 
2 Likes
I usually mount these clamps rotated 90 degrees compared to how you mounted them. That way they have more clearance to the road 
2 Likes
This was just testing the fit and photoshoot
I will make sure to rotate them once I have motors.
2 Likes
That’s beautiful!
He must have a huge vacuum table. That seems like a much quicker process than fiberglass…
1 Like
Nice build
I went with the arbor years ago.
Wheel bite was defintiely a problem, I had to drill xtra holes in the mounts and offset them,
Sold it because I didn’t like sidewinders. and to fund another build
1 Like
Nice. I think I will not have wheelbite problem with Fatboy 230mm. But I don’t have much time to put in the build these days