Noob here just learning but skinned my broken haya v2. Just clear coating now and it looks mint (I think).
I used epoxy and black pigment for the tack layer. So you don’t see through the carbon weave gaps.
Then let tack. Not sticky. So it doesn’t come off on finger when u touch it. Dry Carbon will stick to that very well.
Lay carbon carefully on the tacky base coat.
I let it cure a bit.
Then clear epoxy over (so you can still see the carbon weave).
I used west system. 105/207.
Again I have only done this a couple of times and just followed online vids. Good luck!