3D-Printed Pneumatic Rims For Win and Fitment | Wheels | Hubs

SimosMCmuffin · May 26, 2021, 8:17pm

[quote=“javand, post:62, topic:44128, full:true”]

Note that the 8" rims are from before I started designing the 10" tire rims, so they are a little less developed/refined, as what I had learned from them, I applied to the 10" rims.

All designs use M5x60 bolts to hold the two halves together. Wheel pulley is mounted with M4 hardware. And the bolt pattern for the wheel pulley mounting are custom. I printed the rims with 100% infill.

Note that these are all live versions of the .stl files in my google drive so they can be updated/changed or removed at any time. All files are provided “AS IS”, I don’t take any responsibility if someone uses these models to print them and then subsequently get hurt while using them.

I don’t mind you using them if you change them to fit your own setup, but I would appreciate if you’d link this thread about where you got the original models from, if you post about yours.