I think it rides OK. I’ve got thick rubber under the risers. It wobbles at speed, but I think that could be me. It’s got loads of torque and had climbed anything I’ve thrown at it.
90mm I reckon. Any smaller and I think I would have problems on the roads around here.
1 Like
I’d change your bushings up. They look stock. Would improve things. Help with wobbles.
1 Like
@RipTideSports is on it for me. What Abec 11 wheels are considered the best. Not sure what the difference it between the reflys, flywheels, etc.
1 Like
I prefer the black abecs over the green.
In before Brian tells you to run Kegel core because they’re Superior.
3 Likes
I have some “well-used” 107mm SuperFly F1 wheels that I just took off a short kicktail build because I upgraded it to TB110 wheels
They’d be real cheap if you wanted to try some out before you bought new ones.
2 Likes
You could probably cut them down to 90 mm and they’d be good again lol
2 Likes
They’re still good now 
albeit a tad ugly af
I just wanted TB110 on there. There was nothing wrong with the ride.
1 Like
More pictures please!
I’m just going quote that save me typing the exact same thing!
BUT don’t wait, get an upgrade on those wheels and it will tranform the ride!
2 Likes
Thanks for the pointers. Will look into it!
I’m hyped for a kicktail longboard…gotta learn to weld first
Hooow cheap 
Real cheap 
2 Likes
that thing looks like it would rip apart any hill. very clean build as well
1 Like
What ESC are you using in this build?
Unity
Thanks mate. It’s great fun!
You should be giving those junk yard wheels away you cheap bastard. 
1 Like
Lovely little build that my friend. Good on you.
I should have said that first be honest but Brian selling those one careful owner (nun) hardly used good as new wheels got to me. 
1 Like