Ill have a think about making some kind of tutorials. Don’t have the equipment to make it look professional.
2 Likes
don’t worry about the look, as long as we can see how to put it together.
Who has a build thread using your gear drive with matrix II? Still the same version right?
1 Like
@Andy87’s thread
Doesn’t dive into enough build detail so not that useful to you.
I can make tutorials for:
SR
Trampa
MBS
I don’t have sixshooters or bergmeisters so making tutorials for them will be slightly harder.
And when I make the clamps, I can make tutorials for Boardnamics hangers thanks to @BearHere
4 Likes
Cool, while we wait for your tutorials I will bug @Andy87, worst that could happen, he will tell me to piss off 
1 Like
I can send you a set of bergmeisters if you’d like
3 Likes
@Tamatoa, this is using lrdesigns truck clamp and not moon’s but assembly is similar. Moon’s drive will have the silver truck clamp mounted inside the drive instead of outside.
Like this
I needed more clearance on the beta unit so I put my clamps on the outside. This is fixed in the new version.
The clamps just slide on to the trucks and the shoulder bolts keep them on. If I remove the shoulder bolt, the entire drive comes off as a unit. Very convenient for aligning the gear mesh.
Then just adjust your motors with the gears in so they mesh perfectly. You want only the faces of the teeth to mesh. Apply some grease to where the teeth are meshing while you turn the wheels. My circuit board build thread has some more photos.
The adapter plate is the connection between the wheel hub you’re using and the wheel gear itself.
7 Likes
that is a really nice explanation thanks for spending the time to put this together.
So the clamps are actually press fitted, right? Is their the same for other hangers @moon or is it because @Venom121212 is using surf rodz?
MBS clamp is different, and it’s really secure…
It uses those m8 brake holes on the trucks
6 Likes
It seems pretty straight forward thanks guys.
1 Like
Look at the production tab on the first post
Last picture shows mbs clamps
1 Like
If there is also a spare MBS clamp, I’d like to buy, if not, I’ll wait until next batch 
2 Likes
Same here mooner. I want your gears on my mtb too.
Yeah I made enough for 15 drives so will have spares.
I think that will be too much trouble for you 
1 Like
Anything for you bby 
I mean it’s kinda bm kinda not but Im probably never ever going to use your Berg pulleys because I’ll be using your gear drives, so if want a set of Berg’s I’ll never use, lemme know
What wheels are you going to use? I can’t remember if you told me
I haven’t completely decided. If it’s kegel adapter, probably gonna go for TB110s. If Abec adapter, probably foamies, but if you got spare MBS clamps, imma throw your drives on my colab 
2 Likes
Im confused
1 Like
Yeah wait isn’t this an at drive lol
2 Likes
Send him kegel adapter so he send me his Colab
2 Likes